Home >> Home & Garden >> Home Improvement >> Building & Hardware >> Cabinets & Cabinet Hardware >> HuaHeXiaoCheng Flower Shaped Ceramic Cabinet Drawer Door Pull Handle Knob

HuaHeXiaoCheng Flower Shaped Ceramic Cabinet Drawer Door Pull Handle Knob

SKU:A2629000CO

You will be so impressed when you actually hold this imported ceramics knob in your hand. They are solid, not hollow. The back of the knob has different insets that will neatly seat into various size holes. Made of high quality ceramics, you can't go...
Retail Price:
USD$ 13.89
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 8.79USD$ 8.16USD$ 7.53USD$ 6.70
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • The back of the knob has different insets that will neatly seat into various size holes
  • You will be so impressed when you actually hold this imported ceramics knob in your hand
  • They are solid, not hollow
  • Made of high quality ceramics, you can't go wrong with this fabulous piece of door hardware
  • Material: Ceramics
  • Size: 40 x 27mm/1.57 x 1.06in(Dia. x H)

Details:

HuaHeXiaoCheng Flower Shaped Ceramic Cabinet Drawer Door Pull Handle Knob


  • Flower Shaped Ceramic Cabinet Drawer Door Pull Handle Knob

How to Fix a Door Knob


  • The best way to fix a door knob is to replace it. Unless it just became loose then you just need to retighten and all will be ok
  • After you purchase your replacement set check it to make sure it has all the parts. You should have a strike plate, a striker and the knobs themselves. Also two long screws. There are two kinds of knobs those that lock and those that don't.
  • Some are key entry others just lock by clicking the mechanism on the inside of the door. Those that require a key are usually for entry doors. Those that shut by clicking the mechanism are for bedrooms and baths. and those that do not lock are used for doors that do not require security or privacy. All will install the same way.
  • Remove the old knob by first opening the door and removing the strike plate. Then unscrew the two bolts that hold the locking mechanism in place. Pull these knobs out and remove the striker also remove the strike plate simultaneously.
  • You should be left with a round hole in the door, and a section where the strike plate will be. Also there should be a hole bored leading into the door cutout this will hold the striker. Next insert the new striker into the hole with the striker face towards the inside of the room. secure with screws supplied. Next on the door jamb where your old striker plate was install new striker plate with two screws.
  • Finally align the knobs with the holes on the striker where the door cutout is and secure with the two long screws supplied with your kit. Tighten until snug but do not over tighten. Test to see that it properly closes and if it has a lock test that out to. Just remember not to lock yourself out of the house.

Tips & Warnings:


  • The instructions and illustrations in the instruction pamphlet are very good and easy to follow Use these instructions and you should have successful resultsShould your door not close properly or not at all you have installed the mechanism backwards, re-check the instructions and make sure you followed directions.

Package Included:


  • 1 x Ceramic Cabinet Drawer Door Pull Handle Knob