Home >> Home & Garden >> Home Improvement >> Building & Hardware >> Cabinets & Cabinet Hardware >> Cherry Pattern Ceramic Drawer Pull Handle Knob

Cherry Pattern Ceramic Drawer Pull Handle Knob

SKU:A2627000BM

Furniture needs to update, old hand need new one to replace. If you have the right tools, you can complete any job! Ceramic handle knob is the way to go when designing or fixing up your kitchen or bathroom. Accent your cabinets with th...
Retail Price:
USD$ 7.79
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 4.76USD$ 4.68USD$ 4.59USD$ 4.48
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • You will be so impressed when you actually hold this imported ceramics knob in your hand
  • They are solid, not hollow
  • The back of the knob has different insets that will neatly seat into various size holes
  • Made of high quality ceramics, you can't go wrong with this fabulous piece of drawer hardware
  • It adding a touch of elegance to your decor at a fraction of the price you would find
  • This pull handle knob is very nice size, very comfortable in your hand
  • This pull handle knob resists abrasion and enhances the luster and exquisite beauty of products
  • Suitable for decorate your kitchen, living room, bedrooms
  • This pull handle knob provides beautifully-crafted, high quality home hardware
  • The pull handle knob is made of the eco-friendly material
  • Ceramic pull handle is the way to go when designing or fixing up your kitchen or bathroom
  • The unique ceramic handle knob can be used for either cabinets or drawers, easy to install and use 
  • This drawer pull handle knob is sealed in it's original packaging and includes a 1 screw
  • Material: Ceramic & Metal
  • Size: 39 x 25mm/1.5 x 1.0in(Dia. x H)

Details:

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • You will be so impressed when you actually hold this imported ceramics knob in your hand

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Save time and effort by rekeying your door lock in seconds without taking it off the door

Cherry Pattern Ceramic Drawer Pull Handle Knob 


  • For exterior, unlocks or locks by key in exterior knob or by turnbutton in interior lever

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Cherry Pattern Ceramic Drawer Pull Handle Knob
  • The unique ceramic handle knob can be used for either cabinets or drawers, easy to install and use 

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Its durable, pre-assembled design provides hassle-free installation
  • This pull handle knob resists abrasion and enhances the luster and exquisite beauty of products

How to Fix Locksets & Doorknobs?


  • Many lockset problems can be corrected before they become so serious that the lockset does not work. Often, a malfunctioning latch assembly or lock mechanism causes the problem. An improperly functioning latch may be the result of a poorly fitting door. The lock mechanism may not work simply because the lock is dirty or dry and needs to be lubricated with graphite (do not use any type of oil).
  • For serious lock problems, it is usually best to call a locksmith or to replace the lock entirely. If the problems require professional help, keep in mind that removing the lock and taking it to a locksmith is far less expensive than having the locksmith come to you
  • If a door latch does not operate smoothly, the latch bolt on the door may not be lined up properly with the strike plate on the doorjamb. Repairs range from making minor latch adjustments to repositioning the door
  • If the latch does not catch, close the door slowly to watch how the latch bolt meets the strike plate. The bolt may be positioned above, below, or to one side of the strike plate. (Scars on the strike plate will show where it is misaligned.) It is also possible the door has shrunk and the latch no longer reaches the strike plate. Once you have figured out the problem, try one of the methods shown here.
  • On mortise locksets (the type that fit into a large slot in the edge of the door), doorknobs may become loose over time. To tighten them, loosen the setscrew on the knob's shank. Hold the knob on the other side of the door, and turn the loose knob clockwise until it fits snugly. Then tighten the screw until you feel it resting against the flat side of the spindle. The knob should turn freely. If this does not help, remove the knob and check the spindle; if the spindle is worn, it must be replaced. If the whole lockset is worn, it is best to replace it entirely
  • For less than a 1/8-inch misalignment of the latch bolt and strike plate, file the inside edges of the plate to enlarge the opening.
  • If the latch does not reach the strike plate, shim out the plate, or add another strike plate. If the latch still will not reach, shim out the door's hinges. Replace the door with a wider one as a last resort.
  • For more than a 1/8-inch misalignment, remove the strike plate and extend the mortise higher or lower as necessary. Replace the plate, fill the gap at the top or bottom with wood putty, and refinish

Installing Cabinet Drawer Pulls:


Drawer pulls are handles that are installed on cabinet drawers, so that the drawer can be opened and closed with ease. These items are a combination of function and aesthetic design. A trip to the hardware store or building supply outlet, will show you how many different types of handles there really are. To a newcomer, the choice might seem immense and limitless, but choosing and properly installing the handle is a simple chore that adds immensely to your kitchen or whatever room you are working in

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Install a pull or handle that acts as a knob. This is a simple task, where only one hole is needed for installation. These knobs are almost located dead center in the face of the drawer. To install your own handle, first mark the location of the hole on the outside face of the drawer with a pencil. Make sure that the mark is exactly half the distance between the top and bottom and half the distance between the two sides. Next drill a whole large enough, so that the threaded bolt passes through the hole. Finally thread the bolt into the handle until the handle is tight
  • Install a handle pull that has two points of attachment. This means you will have to make a pair of marks on the front of the drawer, so that the drawer is dead center along both the horizontal and vertical dimensions

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Marking the vertical axis. Take your measurement and divide in half. The best way is to measure the horizontal distance and make a halfway mark for the width of the drawer face. Now, measure the gap in the handle pull that exists between the threaded inserts, where the machine screws will be located. Be sure to measure from center to center. Now divide this number in half and locate one mark on each side of the center mark, so that it is situated half the distance away. You can double check your math by holding the pull next to the two marks to make sure they line up correctly. Make sure everything is lined-up perfectly before you start drilling
  • Drill both holes. Make sure the final size of the hole is big enough, so that the machine screw that is supplied by the manufacturer fits snugly through the hole
  • Insert each machine screw through the hole and tighten the screw from the inside of the drawer until the drawer pull is snug and tight

How to Replace Cabinet Pulls?


Replace cabinet pulls to give your cabinets an inexpensive face-lift

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Remove old door pulls
  • Clean under old pulls
  • Patch holes if your new pulls have different hole alignments

Cherry Pattern Ceramic Drawer Pull Handle Knob


  • Mark holes for new pulls - make sure pulls are centered
  • Drill new holes from the front of the doors
  • Hold pulls in place while you drill new screws into place

Package Included:


  • 1 x Drawer Pull Handle Knob
  • 1 x Bag of Screws