Home >> Toys & Hobbies >> Musical Instruments >> Guitar >> Parts & Accessories >> Small Musicians Electric Guitar Humbucker Pickup Musical Instrument Accessory hv58

Small Musicians Electric Guitar Humbucker Pickup Musical Instrument Accessory hv58

SKU:A2323000BG

This is a Electric Guitar Humbucker Pickup Musical Instrument Accessory. It was clear that different music styles need different kinds of magnetic pickups. This pickup is most often used in the bridge position where it shines with excellent range, re...
Retail Price:
USD$ 57.79
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 34.67USD$ 31.18USD$ 27.69USD$ 23.03
 
  • Top Selling
 
  • Overview

Specifications:


  • Provides balanced string output and clear string definition when playing chords
  • Completely shielded and vacuum epoxy sealed
  • The flat frequency response enables every single note to be heard when playing chords
  • Attaches to the fingerboard and floats between the body and strings
  • The result is the Guitar pickup a pickup that will change your sound forever
  • If you want a big rock or heavy modern sound, this is the pickup for you

Details:

Small Musicians Electric Guitar Humbucker Pickup Musical Instrument Accessory hv58


  • Attaches to the fingerboard and floats between the body and strings

Small Musicians Electric Guitar Humbucker Pickup Musical Instrument Accessory hv58


  • The result is the Guitar pickup a pickup that will change your sound forever

How to Install Electric Guitar Humbucker Pickups:


  • There are two major types of guitar pickups: The single-coil, and the humbucker. Single-coil pickups produce a very clean, crisp, loud, and at times an attacking sound, but nearby electrical objects will cause them to make a buzzing distortion. This "buzzing" is that musicians call "hum" or "humming". In daily life, humming can be heard when you stand near a high-voltage equipment and off any unshielded electrical device
  • The humming is from the magnetic interference, since electric guitars use magnetic pickups (that are powered by a low-current) to convert electric signals from the strings into musical notes. Humbucking pickups cancels out this buzzing, but have a lower output, a weak and muddier sound. Humbuckers are actually two magnets or coils with opposite poles that are placed next to each other. The two cancel out themselves during the electric signal phase and eliminate the humming altogether. The humbucker is a coined word -- hum + bucker (one of the meanings of "bucker": an object that bounces another object off from something). Here the "bouncing off" is referring to the "humming", hence, the name
  • This article is for general installation of humbucker(s), since pickups and electric guitars are slightly different between manufacturers. Despite that, you will get some useful instructions and can modify them according to your guitar

Instructions:


  • Study the new humbucker wiring diagram, it should be included with your purchase
  • Take off all the guitar strings. The strings are positioned right above the pickups, they must be removed for you to have more space to work on your project
  • Place the guitar backside facing you to expose the electrical cover. Remove the electrical cover
  • Remove the screws on the single-coil pickup or humbucker. Take the pickup or humbucker out from the backside of your guitar. Do not force pull, as the pickup or humbucker is still soldered on the wires
  • Examine carefully on the wiring of your old humbucker or pickup. You can draw a diagram for better reference in case you forget. Take notes on the changes you made, as well
  • Using soldering gun, disconnect the wires from the control knobs (volume, treble, bass, balance), and other terminals to the old humbucker or single-coil pickup. Remove the pickup or old humbucker
  • The humbucker you buy should have its own wires sold together. Slide the wires through the guitar body. Now, refer to the new humbucker wiring diagram
  • Using the new humbucker wiring diagram to determine which color represents the ground wire and the hot wire
  • Following the wiring diagram, connect the new humbucker by soldering the wires to the terminals and control knobs using the soldering gun
  • Passing the humbucker through its slot to the front side of the guitar body from the backside. Turn over your guitar to have the front side facing you
  • Position humbucker above the slot, and screw tight with screws to secure. Rewind the guitar strings to their position
  • Replace the back cover. Plug in and you can now test play your new humbucker pickup. Keep the diagram you made in Step 5, it will be useful in the future should you decide to change it back to the original

Package Included:


  • 1 x Electric Guitar Humbucker Pickup Musical Instrument