Home >> Security & Surveillance >> Access Control Systems >> Extended Wall Mount Holder for Wood & Metal Door YD-602

Extended Wall Mount Holder for Wood & Metal Door YD-602


This is a extended wall mount door holder for wood door and metal door. Professional design, dual isolative housing. It is suitable for all kind of the single & double Smoke proof door. Mount the Magnetic Door Stop to the wall or floor and the powerf...
Retail Price:
USD$ 109.38
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 56.11USD$ 46.40USD$ 36.69USD$ 23.74
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Holding Force: 500kg(100Lbs)
  • Voltage: DC 12/24V+10%
  • Working Current: 12V/80mA ; 24V/40mA
  • Suitable for: All kind of the single & double Smoke proof door
  • Surface Temperature: ≤+20℃
  • Operating Temperature: -10~+55℃(14-131F)
  • Suitable Humidity: 0~90%RH
  • Finishes for Shell: High temperature paint and environmental protection zinc
  • Finishes for Armature: Zinc
  • Dimensions: 80 x 80 x 105mm/3.15 x 3.15 x 4.13in(L x W x H)
  • Collinear load test 50kg, 100pounds
  • Dual voltage 12 or 24 VDC(optional)
  • The standard voltage is 12VDC when finished
  • MOV provides reverse current protection
  • Low power, environmental protection
  • Anti-residual magnetism designed
  • Professional design, dual isolative housing
  • Shunt and defend the cigarette door automatically during the fire alarm


Extended Wall Mount Holder for Wood & Metal Door YD-602

  • Professional design, dual isolative housing

How to Install a Magnetic Door Holder

  • Screw the magnetic part of the holder onto the inside trim of a cabinet or onto the door jamb of a light screen door that you wish to keep closed. The magnet should be flush with the outer edge of the cabinet or jamb. Screw the magnetic part of the holder to the outside of a door near the bottom or outside edge if you wish to use it to keep the door open
  • Put the metal plate onto the magnet, and align it so that it is flush with the magnetic holder on all sides. Close the cabinet or screen door, and mark the position of the plate on the door with a pencil. Open the door, align the plate with the pencil marks on the door and screw it in with a screwdriver. Close the door, and test the holder
  • Open the door fully if the holder is meant to keep the door open. Set the metal ball or plate on the magnet, and align it with a surface to which it can be attached, such as a floor, fence board or wall. Screw it into the surface with the screws provided. Open the door to ensure that the holder works

Tips & Warnings

  • If the wood is very hard, it's a good idea to use a drill to make pilot holes for the screws. Use a drill bit that is quite a bit narrower than the screw
  • Don't attach floor mount door holders where they will be a tripping hazard
  • Attach wall mount holders to studs in the wall or to the bottom plate if possible. If you have to use wall anchors, metal molly bolts are preferable to plastic anchors, especially for heavy doors

Package Included:

  • 1 x Set of Extended Wall Mount Door Holder for Wood Door & Metal Door