- Operating Voltage: DC12V
- Length: 5m/16.4ft
- LED Type: 5050 PLCC-6 SMT SMD LED
- LED Number: 150
- Size: 500.00 x 0.80 x 0.25cm/196.85 x 0.31 x 0.10in(L x W x T)
- Free to bend, give full play to your imagination talent
- Small size, rich colors Strip Light
- High brightness, low power consumption LED Strip Light
- LED lamps, high-quality, long life Flexible Strip Light
- Low-cost, low power consumption, the product effect is fantastic
- Widely used in room, hotels, clubs, shopping malls and other places decoration; construction and decoration, all kinds of decorative LED lights boutiques; holidays, exhibitions, a variety of decorative LED lights can be used in bicycle, car decoration, etc.
- Free to bend, give full play to your imagination talent, small size, rich colors
- Low-cost, low power consumption, the product effect is fantastic, high brightness, low power consumption
How to String Outdoor Christmas Lights:
- Sketch the outside of your house, indicating its width and length. Include the locations of any available outlets in your sketch
- Figure out and measure where your lights will go - along the eaves, around the windows, on each tree branch? Add an extra 30 feet or so to allow for the pitch of the roof. Measure the height of bushes and the height of the sections of any trees you want to light
- Figure out how many strings of lights you'll need based on your measurements; strings come in lengths from 25 lights to 200 lights. (For trees and bushes, figure on about 50 lights per foot of height, or double that number if you're using miniature lights.
- Decide what style of lights you want to use: solid, chasing or blinking? Miniature or full-size (C-7 or C-9)? White or colored?
- Shop for lights and test them before you start hanging them. (See "How to Buy Outdoor Christmas Lights" and "How to Test Outdoor Christmas Lights," under Related eHows.
- Make sure your ladder is long enough to reach and that you have a secure place to set it up. It's best to have a helper to hold the ladder for you
- Use plastic light clips to hang the strings from your gutters and eaves. They are safer for the wires than a staple gun and much easier to remove
- Light your trees by starting at the base of the trunk and wrapping the lights around in a spiral. Work your way to the end of each branch, wrapping the lights around each individual branch
- Use full-size C-9 bulbs on evergreens. Start at the top and zigzag the lights through the center of the tree or bush, getting wider with the tree's or bush's shape
- 1 x Flexible LED Strip Light