Home >> Home & Garden >> Inside the Home >> Lamps & Lighting >> Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)

Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)

SKU:A1042000LY

This Remote Control Flexible LED Strip Light is a kind of soft and environmental-friendly product with long service life which can give your car a charming fancy look. Widely used in room, hotels, clubs, shopping malls and other places decoratio...
Retail Price:
USD$ 31.98
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 9.76USD$ 9.66USD$ 9.55USD$ 9.42
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Operating Voltage: DC 12V
  • Length: 5m/16.4ft
  • LED Type: 5050 PLCC-6 SMT SMD LED  
  • LED Number: 300
  • Size: 500.00 x 0.80 x 0.25cm/196.85 x 0.31 x 0.10in(L x W x T)

Features:


  • This Remote Control Flexible LED Strip Light is low-cost, low power consumption, the product effect is fantastic
  • Widely used in room, hotels, clubs, shopping malls and other places decoration; construction and decoration, all kinds of decorative LED lights boutiques; holidays, exhibitions, a variety of decorative LED lights can be used in bicycle, car decoration, etc.
  • This LED Strip Light is free to bend, give full play to your imagination talent
  • LED Strip Light is small size, colorful color with remote control
  • High brightness, low power consumption
  • This LED Strip Light is high-quality and long life

Details:

Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)


  • Widely used in room, hotels, clubs, shopping malls and other places decoration; construction and decoration, all kinds of decorative LED lights boutiques; holidays, exhibitions, a variety of decorative LED lights can be used in bicycle, car decoration, etc.

Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)


  • High brightness, low power consumption
  • This LED Strip Light is high-quality and long life

 Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)


  • This Remote Control Flexible LED Strip Light is low-cost, low power consumption, the product effect is fantastic

Rgyrid 5m SMD 300 x 5050 LED Colorful Color Remote Control Flexible LED Strip Light(DC 12V)



  • This LED Strip Light is free to bend, give full play to your imagination talent
  • LED Strip Light is small size, colorful color with remote control

How to Connect Motor Vehicle LED Lights:



  • Locate areas under the motor vehicle body or fairing where you would like to install the LED lights. Ensure that there are no hot motor vehicle parts close to the locations you pick
  • Clean the areas where you will be installing the lights with alcohol prep pads. This removes the dirt and grime. Allow the alcohol to dry thoroughly so the LEDs will have a clean, dry surface to attach to
  • Remove the adhesive backings on the LEDs and install them by pressing them firmly against the motor vehicle surface. Most LED light strips are flexible and can be curved around the fairing for better illumination
  • Remove the seat and run the wires through the frame of the body to underneath the seat where the battery is located. The wires should not be visible on the outside of the bike
  • Collect all the wires and tighten them together with a wire tie. This keeps the wires organized
  • Loosen the terminal bolts on the motor vehicle battery by using your screwdriver. Tighten the terminal bolts back into place so they firmly hold the wires down
  • Start your motor vehicle and watch your LEDs light up. If all or some of the LEDs are not operating properly, check the battery terminal connections first to ensure that they are tight. If the problem is not resolved, check the clamp connector wiring to ensure that all the wires are stripped properly and in full contact with the inside of the connector

How to Install LED Strip Lights


  • Custom cars sometimes include custom accent lighting as a final touch to highlight the lines of the grill or headlights or illuminate the foot wells inside the vehicle. Flat LED strips fit easily into gaps between trim panels and are easily adapted for various lighting solutions. You can cut flat LED lighting strips to the desired length for any project and connect them to existing vehicle wiring. By connecting the LED wiring to various auto light circuits, you can control when the lights are illuminated.
  • Instructions
  • Cut LED strip lights to the desired length by cutting between groups of lights, according to the manufacturer's recommendations.
  • Expose and strip the ends of the wires leading to the LED lights.
  • Identify the wiring circuit you will tap into to power the lights--the circuit you use will determine when the lights are on. For example, you might install LED lights that blink with the turn signal.
  • Use the voltage tester to identify the correct wire. For example, disconnect the wiring harness for the turn signal, turn on the signal, and probe the wiring harness to identify the wire carrying the current.
  • Identify the fuse for the wiring circuit you plan to tap into, and remove the fuse. Tap into the wiring circuit, using a pinch-type splitter to connect a length of wire to connect to the LED lights--simply insert the wire ends into the splitter and pinch closed. Wrap the splitter and wire bundle with electrical tape.
  • Route the wiring to the location where you will install the LED lights, using electrician's fish wire to pull wire beneath carpets. Glue the wiring in place under trim panels if needed. Strip the end of the power wire and solder it to one wire on the LED strip light--cover the soldered wires with electrical tape.
  • Strip both ends of a length of wire long enough to reach from the LED lights to a bolt or screw on the frame of the vehicle. Loosen the bolt and connect one end of the wire to it. Route the other end of the wire to the LED lights and solder it to the LED ground wire. Cover the soldered wires with electrical tape.
  • Mount the LED lighting strips in place securely with silicone adhesive or zip ties.

Package Included:


  • 1 x LED Flexible String Light
  • 1 x Remote Control