Home >> Security & Surveillance >> Surveillance Accessories >> OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30

SKU:A0793000GC

What you are viewing is a 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30. Illuminate the room without seeing any light! The fantastic LED illuminator board plate will solve the problem.T...
Retail Price:
USD$ 7.79
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 4.94USD$ 4.69USD$ 4.44USD$ 4.10
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Compatible with: Camera lens
  • Beam Angle: 30 Degree
  • Wavelength: 850nm
  • Voltage: DC 12V
  • Dimension: 18mm / 0.71in (Inner Diameter) ; 68 x 63 x 13mm /2.7 x 2.5 x 0.5in(L X W x H)

Features:


  • 42 IR LED board for CCTV security cameras
  • Easy to clean and do not rust
  • The real magic is in the CCTV security camera illuminator board plate
  • A replaceable LED board for your broken or worn out IR LED board
  • Professional illuminator board plate is just for your CCTV security camera
  • Very bright infrared LEDs without much energy consume

Details:

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30


  • The LED illuminator board plate is with 42 LEDs, provides very bright light

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30


  • High quality material makes the 30 degree illuminator board plate durable and reliable for long time use

Size in Detail:

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30


How to Test IR LEDs?

OVP 30 Degree Infrared 42 LED Illuminator Board Plate for CCTV Security Camera with Regulator Board KL-542-30


  • Remote IR LED:
  • Insert new batteries into the remote you want to test
  • Point the front of the remote where the LED is attached at the lens of a digital camera. Turn the digital camera on. A cell phone camera will also work for this
  • Press a button on the remote. If the LED is working properly, you will see a series of bright flashes from the bulb in the camera's LCD screen
  • Individual LED Bulb:
  • Calculate the resistor ohms needed to connect the IR LED bulb to a 9V battery. Resistors limit the amount of electricity passed to the LED. If too much electricity is allowed to pass, it will burn out the bulb
  • To calculate the resistor ohms needed for the LED, subtract the LED's forward volts from the battery's voltage, then divide that number by the amps needed to power the LED. The forward voltage should be listed on the LED's packaging. For example, if your LED requires 40mAh and has a forward voltage of 4v, and you're going to connect the LED to a 9V battery, the equation would look like this: (12volts - 4volts) / 0.04 = 200ohm. In this example, the LED would require a 200ohm resistor in order to run off a 9V battery
  • Twist one end of the resistor onto the longer of the LED's two wires; the longer wire is the positive wire, while the shorter wire is the ground. Clip an alligator clip from the other end of the resistor to the positive terminal on the 9V battery. Clip another alligator clip from the ground LED wire to the negative terminal on the battery
  • Look at the LED light bulb using a digital camera. The bulb is functional if it is glowing on the camera's screen

Package Included:


  • 1 x 30 Degree Infrared 42-LED Illuminator Board Plate for CCTV Security Camera with Regulator Board