Home >> Security & Surveillance >> Surveillance Accessories >> 60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60

SKU:A0793000JG

What you are viewing is a 60 Degree Infrared 42 LED Illuminator Board Plate for CCTV Infrared Lamp, if you are looking for such item, this one is a smart choice for you!The LED illuminator board plate is great for replacing such IR LED board for...
Retail Price:
USD$ 14.78
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 5.71USD$ 5.62USD$ 5.53USD$ 5.40
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications: 


  • Beam Angle: 60 degree
  • Wavelength: 850nm
  • Voltage: DC 12V
  • Compatible with: CCTV Infrared Lamp
  • Size: 76 x 15mm/2.99 x 0.59in(Outer Dia. x H)

Features:


  • 42 IR LED board for CCTV Infrared Lamp
  • Replace a camera LED board for your broken or worn out IR LED board
  • Very bright infrared LEDs without much energy consume
  • Easy to clean and do not rust

Details:

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


  • Infrared 60 degree illuminator board plate with 42 LED for CCTV CCD security camera

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


  • Very bright LED illuminator board plate with 60 Degree and 42 Infrared lights 

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


  • Replace a security camera LED board for your broken or worn out IR LED board

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


  • Excellent in workmanship, made of high qulaity material, the LED illuminator board plate is with long lifespan

How to Test IR LEDs?

60 Degree Infrared 42-LED Illuminator Board Plate for CCTV Infrared Lamp FY-9042-60


  • Remote IR LED:
  • Insert new batteries into the remote you want to test
  • Point the front of the remote where the LED is attached at the lens of a digital camera. Turn the digital camera on. A cell phone camera will also work for this
  • Press a button on the remote. If the LED is working properly, you will see a series of bright flashes from the bulb in the camera's LCD screen
  • Individual LED Bulb:
  • Calculate the resistor ohms needed to connect the IR LED bulb to a 9V battery. Resistors limit the amount of electricity passed to the LED. If too much electricity is allowed to pass, it will burn out the bulb
  • To calculate the resistor ohms needed for the LED, subtract the LED's forward volts from the battery's voltage, then divide that number by the amps needed to power the LED. The forward voltage should be listed on the LED's packaging. For example, if your LED requires 40mAh and has a forward voltage of 4v, and you're going to connect the LED to a 9V battery, the equation would look like this: (12volts - 4volts) / 0.04 = 200ohm. In this example, the LED would require a 200ohm resistor in order to run off a 9V battery
  • Twist one end of the resistor onto the longer of the LED's two wires; the longer wire is the positive wire, while the shorter wire is the ground. Clip an alligator clip from the other end of the resistor to the positive terminal on the 9V battery. Clip another alligator clip from the ground LED wire to the negative terminal on the battery
  • Look at the LED light bulb using a digital camera. The bulb is functional if it is glowing on the camera's screen

Package Included:


  • 1 x Illuminator Board Plate