Instructions for use:
- in a dark environment , long press the switch button for three seconds on, again long press three seconds off .
- Mode selection , long press 3 seconds to open into the automatic mode , the color changes automatically switch to a red light work in the open state , two under the switch to green lighting , triple-click switch into the Blue color lights work again press the switch to automatic mode .
1. Before you use it in the sun charging 3 hours;
2. Always clean up the product outside, keep the surface clean, in order to ensure the normal work of the product;
3. Please tighten all bolts, firmly installing the product, in order to avoid products in high speed rotating wheel will not fall off.
- With a small flat-blade screwdriver to remove the original wheel car standard ;
- Caliper or measuring tools to measure the value of the original car standard card feet in diameter ;
- With a screwdriver card foot diameter of the product positioning screws loose ;
- Adjusted in accordance with the original measurement card foot diameter value diameter , four pins need to adjust the four pin to keep the product centrosymmetric , adjust and tighten the screws ;
- Caliper or measuring tools original car standard card foot height measured values ;
- Numerical installed positioning buckle card in accordance with the previously measured feet height , four positioning buckle highly consistent ;
- Circlip cards inside the four pin buckle feet middle position to ensure the pin elastic ;
- Cover light , long press the switch for three seconds to turn on the product , the entire installation is complete .
1*Upgraded version / solar car wheels lamp / wheel arc lamp / tire lights / Hot Wheels / decorative lights / retrofit lamp