Home >> Car & Motorcycle Accessories >> Car Parts >> Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD

SKU:A0679000OJ

This LED Strip is a kind of soft and environmental-friendly product with long service life which can give your car a charming fancy look. These full color spectrum solid-state light bars are well suited for accent lighting and ambient lighting for sm...
Retail Price:
USD$ 175.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 68.51USD$ 66.85USD$ 65.20USD$ 63.00
 
  • Top Selling
 
  • Overview

Specifications:


  • The 12-volt LED Strip is safe, produces no heat, and is energy efficient
  • The Waterproof LED Strip is easy-to-install unit replaces the Summit's stock roof light bar
  • Fully assembled and pre-wired for fast, easy installation
  • See your decor in a whole new light
  • Support Seven light, transparent white light
  • This Car LED Strip supports 16 models Flashing method
  • Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter light, suitable for lighting perimeter lighting and many other applications
  • The base is flat and flexible and can be easily mount onto most flat surfaces
  • This Car LED Strip is small size and low voltage makes this lighting ideal for a wide range of applications
  • Built in 1 x CR2025 battery
  • Input Voltage: DC12V

Details:

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • This Waterproof LED Strip comes with a DC12V controlbox & remote control, it's easy to use

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • Each lightbar contains 150 super bright LEDs for powerful output, place behind wall art, TVs, sculptures, furniture, in vehicles and elsewhere to discover a new dimension in lighting

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • This Waterproof LED Strip is flat and flexible, it can be easily mount onto most flat surfaces

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • This Car LED Strip is small size and low voltage makes this lighting ideal for a wide range of applications

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • These full color spectrum solid-state Car LED Strip is well suited for accent lighting and ambient lighting for smaller areas

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • This LED Strip is a kind of soft and environmental-friendly product with long service life which can give your car a charming fancy look

Car Flexible Light Strip Show: 

Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD



Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


How to Connect Motor Vehicle LED Lights:


Rgyrid 5m DC12V RGB Waterproof AUTO 150 LED Strip Flexible LightBar 5050SMD


  • Locate areas under the motor vehicle body or fairing where you would like to install the LED lights. Ensure that there are no hot motor vehicle parts close to the locations you pick
  • Clean the areas where you will be installing the lights with alcohol prep pads. This removes the dirt and grime. Allow the alcohol to dry thoroughly so the LEDs will have a clean, dry surface to attach to
  • Remove the adhesive backings on the LEDs and install them by pressing them firmly against the motor vehicle surface. Most LED light strips are flexible and can be curved around the fairing for better illumination
  • Remove the seat and run the wires through the frame of the body to underneath the seat where the battery is located. The wires should not be visible on the outside of the bike
  • Collect all the wires and tighten them together with a wire tie. This keeps the wires organized
  • Loosen the terminal bolts on the motor vehicle battery by using your screwdriver. Tighten the terminal bolts back into place so they firmly hold the wires down
  • Start your motor vehicle and watch your LEDs light up. If all or some of the LEDs are not operating properly, check the battery terminal connections first to ensure that they are tight. If the problem is not resolved, check the clamp connector wiring to ensure that all the wires are stripped properly and in full contact with the inside of the connector

How to Install LED Strip Lights


  • Custom cars sometimes include custom accent lighting as a final touch to highlight the lines of the grill or headlights or illuminate the foot wells inside the vehicle. Flat LED strips fit easily into gaps between trim panels and are easily adapted for various lighting solutions. You can cut flat LED lighting strips to the desired length for any project and connect them to existing vehicle wiring. By connecting the LED wiring to various auto light circuits, you can control when the lights are illuminated.
  • Instructions
  • Cut LED strip lights to the desired length by cutting between groups of lights, according to the manufacturer's recommendations.
  • Expose and strip the ends of the wires leading to the LED lights.
  • Identify the wiring circuit you will tap into to power the lights--the circuit you use will determine when the lights are on. For example, you might install LED lights that blink with the turn signal.
  • Use the voltage tester to identify the correct wire. For example, disconnect the wiring harness for the turn signal, turn on the signal, and probe the wiring harness to identify the wire carrying the current.
  • Identify the fuse for the wiring circuit you plan to tap into, and remove the fuse. Tap into the wiring circuit, using a pinch-type splitter to connect a length of wire to connect to the LED lights--simply insert the wire ends into the splitter and pinch closed. Wrap the splitter and wire bundle with electrical tape.
  • Route the wiring to the location where you will install the LED lights, using electrician's fish wire to pull wire beneath carpets. Glue the wiring in place under trim panels if needed. Strip the end of the power wire and solder it to one wire on the LED strip light--cover the soldered wires with electrical tape.
  • Strip both ends of a length of wire long enough to reach from the LED lights to a bolt or screw on the frame of the vehicle. Loosen the bolt and connect one end of the wire to it. Route the other end of the wire to the LED lights and solder it to the LED ground wire. Cover the soldered wires with electrical tape.
  • Mount the LED lighting strips in place securely with silicone adhesive or zip ties.

Package Included:


  • 1 x 5m Waterproof AUTO 150 LED LightBar
  • 1 x DC12V Controlbox & Remote control