Home >> Security & Surveillance >> Home Alarm >> Fusionsea 6 LED Infrared Motion Detector Light XSL-003

Fusionsea 6 LED Infrared Motion Detector Light XSL-003


What you are viewing is a 6 LED Infrared Motion Detector Light XSL-003, practical and reliable, this Infrared Motion Detector Light is the best choice for you!This 6 LED Infrared Motion Detector Light is a smart motion-sensing LED light that you...
Retail Price:
USD$ 17.38
Wholesale Price:
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 5.94USD$ 5.78USD$ 5.62USD$ 5.40
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Material: Plastic
  • Power by: 2 x AA Batteries
  • Sensitivity: 3m(distance); 90°(angle)
  • Standby Current: <0.35mA(operating voltage:3V)
  • Operating Current: <120mA(operating voltage:3V)
  • Delay Time: 20s; 60s; 90s; Constant(±20%)
  • LED Brightness: Adjustable
  • LED Life: >8000H


  • This is a smart motion-sensing LED light that you can mount anywhere you need hands-free light
  • The infrared radial sensor does not require a direct line-of-sight to work
  • In addition, you can adjust the brightness and length of time the LED stay on
  • This is a high quality 6 LED infrared motion detector light
  • Auto switching on when detecting people coming
  • Wireless Infrared Sensor Light, easy to install, can be used in bedroom, washing room and on refrigerator, washer, iron door
  • Super energy saving, super long standby time, super sensitivity within 3 meter distance
  • Adjustable delay time, adjustable operating brightness, adjustable LED brightness


Fusionsea 6 LED Infrared Motion Detector Light XSL-003

  • Adjustable delay time, adjustable operating brightness, adjustable LED brightness

Fusionsea 6 LED Infrared Motion Detector Light XSL-003

  • In addition, you can adjust the brightness and length of time the LED stay on

Fusionsea 6 LED Infrared Motion Detector Light XSL-003

  • The Infrared Motion Detector Light features long lasting LEDs, save you money when compared to incandescent bulbs

Fusionsea 6 LED Infrared Motion Detector Light XSL-003

  • Made of high quality material, the LED Infrared Light is durable and reliable for long time use

Benefits of an Infrared Lamp:

  • Function: Infrared lamps apply heat without causing the surrounding area to get too hot. This is also known as "radiant heat," and means that deep heat can be applied to specific parts of the body, be absorbed and promote healing. The lamps consist of a round plate coated in a mineral clay. Once plugged in to the current, the lamp begins to warm up and radiate heat.
  • Benefits: Infrared lamps can calm muscle pain, improve circulation, soothe inflammation, help the body to get rid of toxins, provide warmth -- particularly for the elderly -- and help to destress and increase relaxation. A study carried out at Rothbart Pain Management Clinic in North York found that infrared heat therapy could significantly reduce lower back pain in sufferers.
  • Warning: This type of heat should not be used on people who are suffering from fever or high blood pressure, are pregnant, have a tendency to bleed easily or have a pacemaker.

About LED Infrared Light:

  • IR (infrared) sensors detect infrared light. The IR light is transformed into an electric current, and this is detected by a voltage or amperage detector. A property of light-emitting diodes (LEDs) is that they produce a certain wavelength of light when an electric current is applied--but they also produce a current when they are subjected to the same wavelength light
  • A pair of IR LEDs can be used as motion detectors. The first IR LED is wired to emit LED and the second LED is wired to transmit a signal when it receives an IR input. When an object comes within range of the emitted IR, it reflects the IR back to the receiving LED and produces a signal. This signal can be used to open sliding doors, turn on a light or set off an alarm

How Do IR Sensors Work?

  • Infrared is light that has a wavelength longer than visible red light. The ranges of infrared include near infrared, mid infrared and far infrared, spanning wavelengths from about 710 nanometers (near infrared) to 100 micrometers (far infrared)
  • All objects emit light according to their temperature--this is called "black body radiation." The hotter the object, the shorter wavelength of light it emits. The Earth emits infrared light at a peak of about nine to 10 micrometers--and so do warm-blooded animals like humans. This light can be used to detect motion or warmth

How to Test IR LEDs?

Remote IR LED:

  • Insert new batteries into the remote you want to test
  • Point the front of the remote where the LED is attached at the lens of a digital camera. Turn the digital camera on. A cell phone camera will also work for this
  • Press a button on the remote. If the LED is working properly, you will see a series of bright flashes from the bulb in the camera's LCD screen

Individual LED:

  • Calculate the resistor ohms needed to connect the IR LED bulb to a 9V battery. Resistors limit the amount of electricity passed to the LED. If too much electricity is allowed to pass, it will burn out the bulb
  • To calculate the resistor ohms needed for the LED, subtract the LED's forward volts from the battery's voltage, then divide that number by the amps needed to power the LED. The forward voltage should be listed on the LED's packaging. For example, if your LED requires 40mAh and has a forward voltage of 4v, and you're going to connect the LED to a 9V battery, the equation would look like this: (12volts - 4volts) / 0.04 = 200ohm. In this example, the LED would require a 200ohm resistor in order to run off a 9V battery
  • Twist one end of the resistor onto the longer of the LED's two wires; the longer wire is the positive wire, while the shorter wire is the ground. Clip an alligator clip from the other end of the resistor to the positive terminal on the 9V battery. Clip another alligator clip from the ground LED wire to the negative terminal on the battery
  • Look at the LED light bulb using a digital camera. The bulb is functional if it is glowing on the camera's screen

How to Connect an IR LED Lamp?

A remote control uses an infrared (IR) LED to send a beam of invisible light to an IR receiver built into an electronic device, such as a DVD player. The IR LED is attached to the remote's circuit board and will not work if it becomes dislodged from, for example, the remote falling onto the floor. You can connect the IR LED so that it will again function by disassembling the remote. You'll need a few tools, along with some experience in using a soldering iron.

  • Place a sheet of newspaper on a table to protect the surface. Heat up the soldering iron as you proceed to disassemble the remote. Place the remote face down on the newspaper. Remove the battery compartment lid from the back. Remove the batteries and place them and the lid aside.
  • Insert the tip of the flat-edged jeweler's screwdriver into the seam at the top left edge of the remote. Run the tip down the seam until you reach the bottom of the remote. Run the tip across the bottom until you reach the right side of the remote. Run the tip up the seam on the right side until you reach the top of the remote. Run the tip across the seam to the left side of the remote.
  • Pull the back of the remote off the front. Turn the back over and place it down on the newspaper.
  • Use a Phillips jeweler's screwdriver to remove the screws from the four corners of the circuit board on the back of the remote.
  • Pull the circuit board out of the back of the remote. Place the circuit board on the newspaper.
  • Use the tweezers to grip the base of the IR LED in the middle top edge of the circuit board.
  • Push the IR LED towards the circuit board so that the pin connected to the LED's bottom is touching the contact that it broke off of. The contact for the LED's pin is right next to the contact that the other pin on the bottom of the LED is still attached to.
  • Use the solder iron to solder the pin to the contact. Let the solder cool for a minute. Push the IR LED back into its original position. Remove the tweezers from the base.
  • Blow off the circuit board with a blast of compressed air. Return the circuit board to the back case and reattach the screws. Place the front of the remote on the back case, angling the top edge so that the IR LED goes into the slot in the top of the front. Push down on the sides of the front to reengage it to the back case.
  • Turn the remote over. Reinsert the batteries and close the battery compartment

Package Included:

  • 1 x 6 LED Infrared Motion Detector Light