Home >> Electronics >> Gadgets >> Test Equipment >> MASTECH MS2208 Harmonious Power Clamp Meter / Harmonic Power Clamp Meter

MASTECH MS2208 Harmonious Power Clamp Meter / Harmonic Power Clamp Meter

SKU:A024000BUA

The digital power meter is a hand-held intelligent harmonic power tester, with both functions of digital current testing and power testing. The tester is comprised of three channels including voltage, current, and power as well as a micro single chip...
Retail Price:
USD$ 457.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 197.84USD$ 192.29USD$ 186.74USD$ 179.34
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview


Features:

The meter can be used for testing power, voltage, current, peak value, phase, frequency, power factor, phase angle, and reaction factor, etc. of single-/three-phase circuit; automatic phase sequence testing is possible for 3-phase measurement.

True effective value measurement: accurate measurement is possible even with serious distortion in current waveform.

Low-consumption high-speed single-chip microprocessor is employed and sophisticated algorithm is applied, as a result, results can be obtained rapidly and precisely, and up to 20 harmonics and distortion value thereof can be measured.

General specification:


  • Max. common-mode voltage: 600V AC RMS
  • Mode of display: LCD display; Max. reading: 6000
  • Range selection: Fully automatic range selection
  • Frequency detection: automatic (when harmonic is serious, it is better to use manual settings for testing frequency so as to assure the reading stability)
  • Over-range display:  “OL”
  • Data holding:  “HOLD” is shown on LCD
  • Power supply: 3 batteries of 1.5 V, AAA
  • Power consumption: 250 mW
  • Storage temperature: - 20 °C ~ 70 °C
  • Operating temperature: 0 °C ~ 40 °C
  • Temperature Coefficient:0.05×(specified accuracy)per°C
  • Electromagnetic Compatibility: In an RF field of 3V/M,accuracy=specified accuracy , Otherwise accuracy is unspecifieced.
  • Operating Altitude: 2000m CAT Ⅲ 600V;3000m CAT Ⅱ600V
  • Store Altitude: 12000m
  • Dimensions: 208mm×78mm×35mm
  • Weight: about 350 g  (with battery)

Technical specification:


Accuracy:  ±(% read + graduation #) ambient temperature: 18°C ~ 28°C, Humidity 80%, frequency for voltage, current: 45 Hz ~ 65 Hz

AC Voltage RMS



Range

Accuracy


Resolution


Input impedance


10V-600V


±(1.0%+5)


0.1V


1 MΩ //
10 pF


Max. allowed overload voltage: 750 V (RMS)

AC Current  RMS



Range

Accuracy


Resolution


2mA-3999mA


±(2%+5)


0.01mA


4A-200A


±(2%+5)


0.01A


Max. allowed overload current: 200 A

Single-phase active power  
W



Range

Accuracy


Resolution


0.01W-120KW


±(3%+5)


0.01W


Min. test current: 10mA; Min. test voltage: 10V


Power factor                       



Range

Accuracy


Resolution


0.3~1 Capacitive


±(0.02+2)


0.001


0.3~1 Inductive


±(0.02+2)


0.001


Min. test current: 10mA; Min. test voltage: 10V

Passive power       (VAr) 2=(VA) 2+W 2



Range

Accuracy


Resolution


0.01W-120KW


±(3%+5)


0.01VAr


Min. test current: 10mA; Min. test voltage: 10V
Passive power Var is calculated according to the measured V, A, and kW value。

Frequency   (Hz)



Range

Accuracy


Resolution


30Hz~1kHz


0.5%+1


0.1Hz


Min. test current: 10mA; Min. test voltage: 10V


Harmonic test



Harmonic number

Precision of harmonic voltage


1


±(3.0%+10)


2-6


±(3.5%+10)


7-8


±(4.5%+10)


9-10


±(5.0%+10)


11-15


±(7%+10)


16-20


±(10%+10)


Min. test current: 20mA; Min. test voltage: 20V

Item show:

MASTECH MS2208 Harmonious Power Clamp Meter / Harmonic Power Clamp Meter

Accessories:

User Manual                        ×1
Battery 1.5V AA A Battery   ×3
Test Leads                          ×1
Test clip                              ×2(Red,Black)