Home >> Computers & Networking >> Networking & Communications >> Network Interface Cards >> Universal PCI SATA Card VIA6421 Chipest(1P ESATA+2P SATA+1P IDE) with RAID BL-SATA4-R

Universal PCI SATA Card VIA6421 Chipest(1P ESATA+2P SATA+1P IDE) with RAID BL-SATA4-R

SKU:A1113000CH

Thanks for visiting! Are you looking for a good PCI SATA Card, here your dreams will come true. Supports software RAID 0 (striped), RAID 1 (mirror), and RAID 0+1; Sata Controller Card supports co-exist RAID set and Non-RAID HDD; Allows HDDs with diff...
Retail Price:
USD$ 29.98
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 8.81USD$ 8.74USD$ 8.66USD$ 8.57
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • PCI Specification Revision 2.3 compliant
  • Compliant with programming interface for Bus Master IDE Controller, Rev 1.0
  • Compliant with Serial ATA 1.0 specification
  • SATA PCI Card supports 66MHz PCI with 32-bit data
  • Supports programmable and EEPROM, FLASH & EPROM loadable PCI class mode
  • Supports ATAPI devices: CD-ROM, DVD-ROM
  • Integrated SATA Transport, Link Logic & PHY layer
  • 4-Bit sector addressing
  • Virtual DMA
  • Sata Controller Card supports 4 Independent Serial ATA channels (1.5Gbps)
  • RAID function (optional)
  • Supports software RAID 0 (striped), RAID 1 (mirror), and RAID 0+1
  • Supports co-exist RAID set and Non-RAID HDD
  • Allows HDDs with different sizes to be configured in a RAID set Software monitoring utility
  • System Requirements: PC with one 32-bit PCI slot and SATA device; MS Windows 98SE / Me / 2000 / XP / NT 4.0

Details:

Universal PCI SATA Card VIA6421 Chipest(1P ESATA+2P SATA+1P IDE) with RAID BL-SATA4-R



  • Durable enough for long time using; Compliant with programming interface for Bus Master IDE Controller, Rev 1.0

Universal PCI SATA Card VIA6421 Chipest(1P ESATA+2P SATA+1P IDE) with RAID BL-SATA4-R



  • Allows HDDs with different sizes to be configured in a RAID set Software monitoring utility

 Universal PCI SATA Card VIA6421 Chipest(1P ESATA+2P SATA+1P IDE) with RAID BL-SATA4-R


 


  • The PCI support for 66MHz and 32-bit data in support of EEPROM memory with programmable memory and the PCI load class model

How to Install a PCI SATA Card:


  • Step 1: Turn off the PC and unplug all cables
  • Step 2: Open the PC's case using a screwdriver. Standard cases can be opened by removing a few screws along the right side of the back of the case
  • Step 3: Locate an open PCI slot on your motherboard. The PCI slots are along the lower back corner of the case
  • Step 4: Use a screwdriver to remove the slot cover on the PCI slot. The slot cover is a small piece of metal that separates the inside of the case from the outside. A single screw should be accessible just inside the case; remove the screw to take off the slot cover
  • Step 5: Plug the PCI SATA card into the PCI slot. Align the card in the slot so that the connectors are square and then push the card in firmly. The metal part of the card at the back of the computer should align with the back of the computer where the slot cover used to be
  • Step 6: Screw the slot cover screw back in to secure the card in place
  • Step 8: Close your computer's case, plug the cords back in and turn it on
  • Step 9: Insert the driver CD that game with your SATA card and run the driver installer or setup process and restart the computer when setup is complete

Tips & Warnings:


  • After installing the PCI SATA controller, you can connect a SATA hard drive to the card using a SATA interface cable. Simply plug one end of the SATA cable into the back of a SATA hard drive and then plug the other end of the cable into one of the SATA ports on the PCI SATA controller
  • SATA cards vary as to how many SATA ports they have; if you are planning to install several SATA hard drives, make sure your card has an adequate number of ports

Package Included:


  • 1 x PCI SATA Card VIA6421 CHIPSET 1P ESATA 2P SATA 1P IDE with RAID BL-SATA4-R