- Wireless control, easy to install.
- Control Lights, Motors, Fans, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V.
- You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
- The receiver has farther working range with external extend antenna,about 2000 meters !
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One/several transmitters can control one/several receivers simultaneously.
- If you use two or more receivers in the same place, you can set them with different codes.
- Transmitting Frequency: 315MHz / 433MHz
- Model No.: S1T-DC09-ANT2 / S1T-DC12-ANT2 / S1T-DC24-ANT2
- Channel: 1 CH
- Control Mode: Toggle (Press -> On; Press again -> Off)
- Coding Type: Fixed code
- Coding Setting: By bonding pad encoded
- Power Supply (Operating Voltage): DC12V±1V (S1T-DC12-ANT2), DC9V±1V (S1T-DC09-ANT2), DC24V±1V (S1T-DC24-ANT2)
- Working Voltage Range of Relay: AC110~240V or DC0~28V
- PCB size: 68mm x 48mm x 20mm
- Case size: 75mm x 55mm x 30mm
- Maximum Working Current: 5A / each channel
- Model No.: CB-1
- Channel: 1 CH
- Remote Control Distance: 1000m / 3000ft (theoretically)
- Encode: Fixed code by Pins
- Unit size: 135mm x 42mm x 25mm
- Power Supply: 1 x 6F22-9V battery (Included, useful life 6-12 months)
Details：This 1CH rf remote control system operates in the 315/433MHz frequency, with voltage AC110~240V or DC0~28V.
It is great for hard to reach lights or other DC/AC electrical devices, remote distance can be 2000m theoretically.
Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc.
External extend antenna:
- Frequency Range: 300~450MHz
- Impedance: 50Ω
- Antenna Length: 15cm
- Cable Length: 150cm
- Weight: 35g
- Anti-interference, waterproof, shielded wire set inside
- Magnetic stand design for easy to install
- 1 x Receiver: S1T-DC09-ANT2 / S1T-DC12-ANT2 / S1T-DC24-ANT2 (1 Channel / Toggle Control Mode)
- 1 x Transmitter: CB-1
- 1 x User manual
- Initial state: B, D = Normally Closed; D, K = Normally Open.
- Press button: Turn on relay (connect D and K, disconnect B and D)
- Press button again: Turn off relay (disconnect D and K, connect B and D)