Home >> Car & Motorcycle Accessories >> Car Parts >> 1/4" Color CMOS 170° Wide Angle Car Rear View Camera for Roewe 750 HL-5811

1/4" Color CMOS 170° Wide Angle Car Rear View Camera for Roewe 750 HL-5811


Are you tired of looking back frequently when you back a car or park it in a narrow place? Now you can relax with this HL-5811 Color CMOS 170 Degree wide angle car rearview camera for Roewe 750. It is designed to be installed on the rear of the car t...
Retail Price:
USD$ 51.58
Wholesale Price:
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 23.41USD$ 21.74USD$ 20.07USD$ 17.85
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Mounting lamp instead of lighting facilities
  • With distance label
  • Support 170° wide viewing angle
  • With high resolution image, you can see the back road situation clearly
  • A practical device for backing-up or parking more safely
  • It is very easy to use and install
  • Mounting lamp instead of lighting facilities
  • This is a non-OEM product
  • Compatible with: Roewe 750
  • IP Rating: IP66
  • TV Lines: 420 TV Lines
  • Sensor: 1/4" color CMOS
  • System: NTSC/PAL
  • Numbers of Pixels: 580 x 492 / 628 x 492
  • Lens Angle: 170 degrees
  • Operating Temperature: -25~+75°C
  • Operating Voltage: DC 12V
  • Minimum Illumination: 0.2 LUX  



  • The rear-view camera usually does permit the camera to view a continuous horizontal view from one corner, behind the car, to another

How to Install a Rear-View Camera in Your Car:

  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:

  • 1 x Car Rear View Camera
  • 1 x User Manual
  • 1 x Positive - Negative Power Connection Cable