Home >> Security & Surveillance >> 4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4" SHARP CCD 420TVL Wired Color Camera ES301CCD+2.4G-2.5W+S-200
All Categories

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4" SHARP CCD 420TVL Wired Color Camera ES301CCD+2.4G-2.5W+S-200

SKU:A1523000EL

Do you want to make your life more easier and safer? Then you may take this effective and clear wireless camera. This is a 4 channel MEPG4 DVR & 2.4GHz 4 channel wireless AV receiver & transmitter & 1/4" SHARP CCD 420TVL wired color camera, four tran...
Retail Price:
USD$ 319.98
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 126.03USD$ 118.87USD$ 111.72USD$ 102.17
 
TV Standard:
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


DVR:


  • Video Format: PAL/ NTSC
  • Resolution: PAL: 352 x 288(CIF), 704 x 576(D1); NTSC: 320 x 240(CIF), 640 x 480(D1)
  • Maximum Format Rate Per Channel: 25 fps (PAL); 30 fps (NTSC)
  • Video Channels: Single Channel/ Four Channels
  • Audio Format: 8 Bit, one Channel
  • Audio Channels: 3101(one audio)/ 3104(two audios)
  • Data Format: MEPG4

System Requirements:


  • Screen Set: 1024 x 768
  • DirectX: DirectX9.0
  • RAM: 256M
  • VGA: 32M
  • CPU: Intel PⅡ 800M
  • USB: USB2.0
  • OS: Win2k(sp4)/ Winxp(sp2)

Special Notice:


  • For usage of the software, please refer to the electronic manual in the CD-ROM
  • Our grabbers are equipped with some precise instruments. When they are moved or installed, please be careful
  • Make sure that your PC USB interface is 2.0 version, since our grabbers just support USB2.0
  • To prevent non-image display, please connect cameras to USB grabbers and power on the cameras, before installing USB grabbers to computer
  • If you need to remove the USB grabber, please follow the steps; right click the taskbar→ stop device→ pull out the USB grabber
  • Using our grabber with other USB devices simultaneously may cause the problem that PC can not identify USB grabber. Do not insert two or more USB video capture grabbers or use with other PCⅠvideo capture grabbers at the same time
  • In case of problems, please contact with local technical support for professional help

2.4G Wireless Receiver Transmitter Kit:

Receiver:
 


  • Receiver Channel: 4 Channels
  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Voltage: DC 12V
  • Output Current: ≤300mA

Transmitter:


  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Transmitting Power: 2500mW
  • Transmitting Distance: 350M
  • A/V Mode Method: FM
  • Transmitting Format: PAL/NTSC
  • Input: Video out +R/L Audio in
  • Output Current: ≤1600mA
  • Voltage: DC 12V
  • Operating Temperature: -10℃~50℃

Features:


  • Four transmitters can be connected to only one receiver at one time
  • Auto switch function of the wireless camera, when connected to four transmitters, it can switch automatically to another picture of transmitter every 5 sec
  • Strong noise immunity, high transmission frequency can prevent 900 MHz frequency channel crowded to capacity radio telephone interference of signal from effectively extremely
  • High quality of video and real stereo wireless transmission

Attention:


  • Should install it at the place where children Cannot touch
  • Do not expose it at the dam place for preventing it from water or protecting people from electric shock
  • Please pull the transformer out when you stop using it
  • Please use the transformer produced by our company. Or our company will not be in Charge of any damage incurred by the product
  • Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
  • Do not touch the emission antenna in case you will be burned when the transmitter is electrified

Camera:


  • Image Device: 1/4" SHARP Color CCD
  • Number of Pixels: PAL: 512(H) x 582 (V), NTSC: 512(H) x 492 (V)
  • Scanning System: PAL / NTSC
  • Sync System: Internal Synchronization
  • Horizontal Resolution: 420TV Lines
  • Usable Illumination: 1 Lux
  • S/N Ratio: More than 48dB
  • Camera Characteristic: 0.45
  • Electronic Shutter: PAL:1/50~1/100,000 S, NTSC: 1/60~1/100,000 S
  • Video Output: 1.0 Vp-p 75ohms, Negative
  • Power Consumption: 12V±10% DC, 120mA
  • Built-in Lens: 3.6mm Lens/F1.5
  • Supply+12V DC to power & video output automatically makes video out signal available
  • Electronic iris can be used in applications with a wide spectrum of lighting
  • Angle of view is determined according to lens type in use (Standard: 3.6mm lens)

Details:

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4


  • The parts of the wireless camera

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4


  • Full-scale look of the wireless camera 

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4


  • All the accessories for this wireless camera

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4


  • The USB cable detail

Package Included:


  • 1 x 4 Channel MEPG4 DVR
  • 1 x Waterproof Camera
  • 1 x Software CD
  • 1 x Transmitter
  • 1 x Receiver
  • 1 x Transmitter Antenna
  • 1 x Receiver Antenna
  • 2 x AV Cables
  • 1 x Adapter for Receiver
  • 1 x Adapter for Transmitter
  • 1 x Power Adapter