Home >> Security & Surveillance >> 4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4" SHARP CCD 420TVL Dome Color Camera KIFERMD-842C+2.4G-2.5W+S-200
All Categories

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4" SHARP CCD 420TVL Dome Color Camera KIFERMD-842C+2.4G-2.5W+S-200


Brand new 2.4GHz, 4 channels wireless AV receiver and 2500mW wireless AV transmitter, 350M transmitting distance, audio video output, can be wireless connection camera or TV set and other monitoring kit video transmission. This is a brand new 1/4" ca...
Retail Price:
USD$ 333.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 130.59USD$ 123.17USD$ 115.74USD$ 105.85
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview



  • Video Format: PAL/ NTSC
  • Resolution: PAL: 352 x 288(CIF), 704 x 576(D1); NTSC: 320 x 240(CIF), 640 x 480(D1)
  • Maximum Format Rate Per Channel: 25 fps (PAL); 30 fps (NTSC)
  • Video Channels: Single Channel/ Four Channels
  • Audio Format: 8 Bit, one Channel
  • Audio Channels: 3101(one audio) / 3104(two audios)
  • Data Format: MEPG4

System Requirements:

  • Screen Set: 1024 x 768
  • DirectX: DirectX9.0
  • RAM: 256M
  • VGA: 32M
  • CPU: Intel PⅡ 800M
  • USB: USB2.0
  • OS: Win2k(sp4)/ Winxp(sp2)

Special Notice:

  • For usage of the software, please refer to the electronic manual in the CD-ROM
  • Our grabbers are equipped with some precise instruments. When they are moved or installed, please be careful
  • Make sure that your PC USB interface is 2.0 version, since our grabbers just support USB2.0
  • To prevent non-image display, please connect cameras to USB grabbers and power on the cameras, before installing USB grabbers to computer
  • If you need to remove the USB grabber, please follow the steps; right click the taskbar→ stop device→ pull out the USB grabber
  • Using our grabber with other USB devices simultaneously may cause the problem that PC can not identify USB grabber. Do not insert two or more USB video capture grabbers or use with other PCⅠvideo capture grabbers at the same time
  • In case of problems, please contact with local technical support for professional help

2.4G Wireless Receiver Transmitter Kits :


  • Color: Silver
  • Receiver Channel: 4 Channels
  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Voltage: DC 12V
  • Output Current: ≤300mA


  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Transmitting Power: 2500mW
  • Transmitting Distance: 350M
  • A/V Mode Method: FM
  • Transmitting Format: PAL/NTSC
  • Input: Video out +R/L Audio in
  • Output Current: ≤1600mA
  • Voltage: DC 12V
  • Operating Temperature: -10℃~50℃


  • Four transmitters can be connected to only one receiver at one time
  • Auto switch function, when connected to four transmitters, it can switch automatically to another picture of transmitter every 5 sec
  • Strong noise immunity, high transmission frequency can prevent 900 MHz frequency channel crowded to capacity radio telephone interference of signal from effectively extremely
  • High quality of video and real stereo wireless transmission


  • Should install it at the place where children Cannot touch
  • Do not expose it at the dam place for preventing it from water or protecting people from electric shock
  • Please pull the transformer out when you stop using it
  • Please use the transformer produced by our company. Or our company will not be in Charge of any damage incurred by the product
  • Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
  • Do not touch the emission antenna in case you will be burned when the transmitter is electrified


  • Image Sensor: 1/4" Sharp Color CCD
  • DSP: Sharp
  • CCD Total Pixels: NTSC: 537 (H) x 505 (V), PAL: 537 (H) x 597 (V)
  • Scanning System: NTSC: 525 lines, 60 fields/sec, PAL: 625 lines, 50 fields/sec
  • SYNC System: Internal
  • Minimum Illumination: 1.0Lux F1.2
  • Resolution: 420 TV Line
  • Whiter Balance: AUTO
  • Gain Control: AUTO
  • S/N RATIO: 48dB (AGC OFF)
  • Electronic Shutter: NTSC: 1/60~1/120,000 sec, PAL: 1/50~1/120,000 sec
  • B.L.C. Function: AUTO
  • Video Output: Composite 1.0V p-p at 75 ohm
  • Gamma Correction: 0.45
  • LENS: 16mm Lens
  • Operation Temperature: -10℃ TO 50℃
  • Operational Humidity: Within 85%RH
  • Power Supply: DC12V±1V / 100mA


  • Recommend to use a regulated DC 12V power supply unit with camera for best picture and for safe operation of the unit. Unregulated DC 12V power supply usually provides around 17-20V after loaded and can cause a damage on the camera
  • Recommend to use the camera with the monitor which has the standard video input impedance level of 75Oms. If in any case your monitor is set to high impedance mode, please switch them on it or standard impedance position. If the monitor do not have the impedance adjust switch, please ask us for a camera suitable for your monitor
  • Do not attempt to disassemble the camera. There are no user serviceable parts inside. Refer servicing to qualified service personal
  • Never face the camera toward the sun. If may cause a smear on the picture when the camera is directly faced to the sun or spot light or light reflecting objects
  • Do not expose the vamera to rain or moisture, or do not try to operate the camera in wet area. Moisture can damage the camera and can create the danger of electric shock


4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4

  • The wireless camera parts

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4

  • Total apperance of the wireless camera

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4

  • All the accessories for this wireless camera

4 Channel MEPG4 DVR & 2.4GHz 4 Channel Wireless AV Receiver and Transmitter &1/4

  • The cable design

Package Included:

  • 1 x 4 Channel MEPG4 DVR
  • 1 x Software CD
  • 1 x 1/4" SHARP CCD 420TVL Dome Color Camera
  • 1 x 4 Channels Wireless Receiver
  • 1 x 2.4G Wireless AV Transmitter
  • 1 x Adapter for Receiver
  • 1 x Adapter for Transmitter
  • 2 x AV Cables
  • 1 x Antenna for Receiver
  • 1 x Antenna for Transmitter
  • 1 x Power Adapter