Home >> Security & Surveillance >> 4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3" SONY CCD 420TVL 30 LED IR Waterproof Camera SYL-6048+2.4G-2.5W+S-200
All Categories

4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3" SONY CCD 420TVL 30 LED IR Waterproof Camera SYL-6048+2.4G-2.5W+S-200

SKU:A1523000DX

New portable external USB 2.0 plug-and-play function 4 channels digital video record system (DVR surveillance system). Brand new 2.4GHz, 4 channels wireless AV receiver and 2500mW wireless AV transmitter, 350M transmitting distance, audio video outpu...
Retail Price:
USD$ 260.78
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 129.56USD$ 123.83USD$ 118.09USD$ 110.44
 
TV Standard:
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:

DVR:


  • Video Format: PAL/ NTSC
  • Resolution: PAL: 352 x 288(CIF), 704 x 576(D1); NTSC: 320 x 240(CIF), 640 x 480(D1)
  • Maximum Format Rate Per Channel: 25 fps (PAL); 30 fps (NTSC)
  • Video Channels: Single Channel/ Four Channels
  • Audio Format: 8 Bit, one Channel
  • Audio Channels: 3101(one audio)/ 3104(two audios)
  • Data Format: MEPG4

System Requirements:


  • Screen Set: 1024 x 768
  • DirectX: DirectX9.0
  • RAM: 256M
  • VGA: 32M
  • CPU: Intel PⅡ 800M
  • USB: USB2.0
  • OS: Win2k(sp4)/ Winxp(sp2)

Special Notice:


  • For usage of the software, please refer to the electronic manual in the CD-ROM
  • Our grabbers are equipped with some precise instruments. When they are moved or installed, please be careful
  • Make sure that your PC USB interface is 2.0 version, since our grabbers just support USB2.0
  • To prevent non-image display, please connect cameras to USB grabbers and power on the cameras, before installing USB grabbers to computer
  • If you need to remove the USB grabber, please follow the steps; right click the taskbar→ stop device→ pull out the USB grabber
  • Using our grabber with other USB devices simultaneously may cause the problem that PC can not identify USB grabber. Do not insert two or more USB video capture grabbers or use with other PCⅠvideo capture grabbers at the same time
  • In case of problems, please contact with local technical support for professional help



2.4G Wireless Receiver Transmitter Kits:

Receiver:


  • Color: Silver
  • Receiver Channel: 4 Channels
  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Voltage: DC 12V
  • Output Current: ≤300mA

Transmitter:


  • Frequency: 2.411GHz, 2.431GHz, 2.451GHz, 2.471GHz
  • Transmitting Power: 2500mW
  • Transmitting Distance: 350M
  • A/V Mode Method: FM
  • Transmitting Format: PAL/NTSC
  • Input: Video out +R/L Audio in
  • Output Current: ≤1600mA
  • Voltage: DC 12V
  • Operating Temperature: -10℃~50℃

Features:


  • Four transmitters can be connected to only one receiver at one time
  • Auto switch function, when connected to four transmitters, it can switch automatically to another picture of transmitter every 5 sec
  • Strong noise immunity, high transmission frequency can prevent 900 MHz frequency channel crowded to capacity radio telephone interference of signal from effectively extremely
  • High quality of video and real stereo wireless transmission

Attention:


  • Should install it at the place where children Cannot touch
  • Do not expose it at the dam place for preventing it from water or protecting people from electric shock
  • Please pull the transformer out when you stop using it
  • Please use the transformer produced by our company. Or our company will not be in Charge of any damage incurred by the product
  • Our company will not be responsible for any damage incurred by your amending or dismounting without a permit
  • Do not touch the emission antenna in case you will be burned when the transmitter is electrified

1/3"SONY CCD Camera:


  • Image Sensor: 1/3"SONY CCD
  • Effective Pixels: 512(H) x 582(V)(PAL), 512(H) x 492(V)(NTSC)
  • Horizontal Resolution: 420TV lines
  • Signal System: PAL/NTSC
  • Minimum Illumination: 0.000Lux x F1.2(LED on)
  • LED: 30Pcs
  • Infraed Lamps: 40m
  • Backlight Compensation: ON
  • Shutter Speed: 1/50(1/60)-1/100,000sec
  • White Balancet: Auto
  • S/N Ratio: More than 48db
  • Operation Temperature: 20℃ + 60℃ RH95% 
  • Sync System: Internal Synchronization
  • Video Output: 1.0Vp-p.75Ω
  • Power Requirement: DC12V + 10% 1000MA
  • Size: 162 x 96 x 92mm/6.4 x 3.8 x 3.6in(L x W x H)
  • Regulated power supplies are recommendable
  • Switch to the right type of autoiris lens when you use the camera, in this way the lens can be controlled by the adjustable level
  • Auto tracking white balance
  • Internal synchronization sync system
  • For both indoor and outdoor monitoring

Details:

4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3


  • The wireless camera show

4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3


  • The detail of the wireless camera

4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3


  • The data cable of the wireless camera

4CH MEPG4 DVR & 2.4GHz 4CH Wireless AV Receiver and Transmitter & 1/3


  • Accessories for this wireless camera

Package Included:


  • 1 x Waterproof Camera
  • 1 x 4 Channel MEPG4 DVR
  • 1 x Software CD
  • 1 x Receiver
  • 1 x Transmitter
  • 2 x Antennas
  • 2 x AV Cables
  • 1 x Adapter for Receiver
  • 1 x Adapter for Transmitter
  • 1 x Power Adapter