Home >> Electronics >> Home Audio & Video >> Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker

Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker

SKU:A2183000DY

Stock:1
It is very boring to listen to music alone with earphone or headphone and it will be interesting when you share the music with the speaker around you. Now let everybody joy you and listen to the beautiful sound with you! The PC DVD Multimedia Sp...
Retail Price:
USD$ 149.46
Wholesale Price:
 
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 132.55USD$ 129.72USD$ 126.89USD$ 123.12
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Live your games with the speaker system
  • Lose yourself in titanic bass and astonishingly accurate, full-spectrum sound from precision-matched speaker drivers
  • Say good-bye to built-in PC audio and get down with your music, games, videos, and movies with this 2.0CH Multimedia Speaker System
  • 25mm Soprano loudspeaker adopts silky diaphragm
  • 6.5 inches bass speakers, composite diaphragm use particular glue
  • Conveniently connect this sleek PC DVD Multimedia Speaker to your PC, notebook or MP3 player, and experience great audio immediately
  • For everyday music listening at an amazing value with the 2.0CH Multimedia Speaker 
  • Total Power Output: RMS 25W x 2 (THD+N=10%, f0=1KHz)
  • Signal to Noise Ratio: ≥95dBA (THD+N=1%)
  • Distortion: ≤0.5%
  • Audio Input Type: PC/MP3/CD/DVD 3.5mm to RCA inputs
  • Adjustment: Master volume control, Bass/treble trimmer, Power
  • Subwoofer: 6.5inch (166mm), magnetically shielded, 4Ω
  • Tweeter Unit: 1inch (25mm), magnetically shielded, 6Ω
  • Control Panel: Power, Volume, Treble, Bass

Dimension:


  • Active speaker: 196mm x 320mm x 267mm/7.7 x 12.6 x 10.5in(W x H x D)
  • Passive Speaker: 196mm x 320mm x 253mm/7.7 x 12.6 x 10.0in(W x H x D)

Details:

Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker
  


  • Kick back with your music
  • The PC DVD Multimedia Speaker is designed to let you enjoy the sounds at anytime anywhere

Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker


  • Live your games with the speaker system
  • The down-firing subwoofer features a real wood housing that provides deep, rich bass you can feel 

Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker


  • For everyday music listening at an amazing value with the 2.0 Channel Multimedia Speaker

Garsin Edifier R2000T Theater Home 2.0 CH PC DVD Multimedia Speaker


  • 25mm Soprano loudspeaker adopts silky diaphragm

How to Install Subwoofers? 

Most automobile manufacturers do not consider subwoofers standard car stereo equipment. So if you want to beef up your bass, you will need to mount them yourself. Installing subwoofers is a tricky proposition but these steps can help you do the job yourself

Instructions:


  • Study the directions for installing the subwoofer and make sure you have the tools and mechanical expertise to undertake the project
  • Gather and assemble everything you will need to install your subwoofers, then detach your car's negative battery terminal
  • Fasten a ring terminal to the end of the power cable and attach it to the battery's positive terminal. Locate a spot nearby for the fuse holder and join it to the battery wire. Attach the end of the remaining wire to the other side of the fuse holder. The fuse should not be in the holder
  • Locate a spot where the wire can be brought through the firewall and inside the car. Ideally, the opening should go to one of the foot wells
  • Push and pull the wire through the opening and below the flooring until it reaches the subwoofer on the door frame or under the carpet. Extend it to the amplifier and verify the distance. Play it safe by tacking on several more feet. Cut the wire and hook up the amplifier
  • Find some bare metal or a sturdy bolt that runs inside the car several feet from the amplifier. When connecting to bare metal crease a ring terminal to the ground cable and attach it to the body with a thread cutting screw. If making an existing bolt connection, place a ring terminal on the body bolt. Now you are ready to join the ground to the amplifier
  • Follow the manual instructions on running remote and signal wires. Attach them to the amplifier and verify all your links
  • Test your amplifier and subwoofers and select your settings. Hook the negative battery terminal back up. With the fuse holder empty, activate your car's accessory power ignition to verify that everything works and none of the fuses are bad
  • Turn off the ignition to accessory power and place the fuse into the holder, connecting the amplifier. Verify the settings on your subwoofer. Activate the accessory power and switch on the radio. The sound of a bass line indicates a successful subwoofer installation

Tips & Warnings:


  • Mount your amplifier in a level, open area that is conducive to cooling
  • Do not affix the amp directly to your car's chassis.Rusty metal can be cleaned by sanding and then rubbing clean
  • Installing the fuse should be the final step.Ready-made amplifier kits come with everything you need to install your subwoofers

Package Included:


  • 2 x Speakers