Home >> Security & Surveillance >> Access Control Systems >> Stainless Steel Bracket for Frameless Glass Door ABK-700

Stainless Steel Bracket for Frameless Glass Door ABK-700

SKU:A14550000X

This Steel Standards and Brackets are all high quality, precision fitted pieces. They are easily assembled and mounted. You get the advantage of both durable steel construction and a choice of finishes. Stainless Steel Bracket for Frameless Glass Doo...
Retail Price:
USD$ 156.78
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 73.91USD$ 59.87USD$ 45.83USD$ 27.10
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • Standard Structure: Stainless steel, wire drawing finished
  • Suitable for Door: Frameless glass door
  • Glass Thickness: 10~15mm
  • Opening Mode: 90 or 180° Door
  • Use with: YB-100/200/300
  • Finished for Shell: Anode hardening plating
  • Special stainless steel, firm and durable
  • Special design, suitable with all kinds of the door
  • The best choice of access control

Details:

Stainless Steel Bracket for Frameless Glass Door ABK-700


  • Special design, suitable with all kinds of the door

How to Install a Door Bracket for an Electric Garage Door:


  • Mark where the bracket for an electric door will go in the garage door. Center the bracket on the top middle of the door
  • Place the bracket on the center mark and draw marks for the bolt holes. Make sure that the bracket is facing the right way. Usually the brackets are labeled so you know which way is up
  • Use an existing hole if you are replacing an existing bracket for an electric garage door. You still might have to make marks for three of the bolt holes
  • Drill a hole for the bottom of the bracket. If you are using an existing bolt hole, just skip to the next step
  • Hold the bracket in its place on the door and insert the first bolt from the outside of the door to the inside. You will have to reach your hand to the outside of the door to do this effectively
  • Tighten the nut by hand after slipping on the washer, and then snug it a little more with the socket wrench. In this way, the bracket will stay in place and you don't have to hold it up while you drill the other holes. Since a common problem with brackets is coming loose due to the vibration of the mechanism and the door, you might want to use a carriage bolt that goes completely through the door in combination with a locking nut and washer
  • Align the bracket for an electric garage door properly. Drill a hole for the top bolt.
  • Insert a carriage bolt, and snug the nut with the socket wrench
  • Repeat the process for the remaining two bolts and nuts, drilling and inserting the bolt one at a time to ensure the bracket remains perfectly straight

Package Included:


  • 1 x Stainless Steel Bracket for Frameless Glass Door