Home >> Security & Surveillance >> Surveillance DVR >> 8 Channels Standalone DVR with Four Channels Video Input H.264 Compression & FAT32 Hard Disk Format SY-HD08

8 Channels Standalone DVR with Four Channels Video Input H.264 Compression & FAT32 Hard Disk Format SY-HD08


This standalone network DVR offers a comprehensive solution for displaying, storing and managing video data. It has 8 CH composite video input and 8 standalone DVR. Manual, schedule, motion detect, alarm recording.
Retail Price:
USD$ 1093.38
Wholesale Price:
Wholesale Price
Quantity 2-45-910-29≥30
Price USD$ 668.24USD$ 604.80USD$ 541.37USD$ 456.79
TV Standard:
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
  • Overview


  • Compression: H.264
  • Parameter: 2U big case
  • Video Source: PAL: 200 frame(25 F/S/CH); NTSC: 240 frame
  • Live Resolution: D1(704 x 576)
  • Recording Resolution: D1(704 x 576)
  • Input: 8CH BNC
  • Output: 1 CH BNC, 1 CH VGA(resolution 1280 x 1024, 60Hz)
  • Video Standard: PAL, NTSC adjustable
  • Audio Input: 8 CH
  • Audio Output: 1 CH
  • Audio Compression: G.723
  • Recording Mode: Manual, Schedule, Motion detect, Alarm recording
  • Playback: 4CH
  • HDD: 2 x SATA interfaces, can put just one HDD
  • HDD Volume: 1T
  • HDD Format: FAT32
  • Backup: USB device backup, network backup, Local HDD backup
  • Net Port: Ethernet10/100Base-T, RJ45
  • Protocol: UDP/IP, TCP/IP, IGMP(multicast), DNS&DHCP client, PPOE, DDNS
  • Net Browsing Method: Client software, IE browsing
  • CMS: Preview 36CH video in client software, manage 255 pcs DVR
  • Alarm Input: 8CH
  • Alarm Output: 4CH
  • RS485: 1 x RS485,support PTZ control
  • RS232: 1 x RS232
  • USB: 2
  • Remote Control: Support
  • Mouse: USB Mouse
  • Panel: Support
  • Network Control: Support
  • 3D Keyboard Control: Only support VC protocol 3D keyboard


8 Channels Standalone DVR with Four Channels Video Input H.264 Compression & FAT32 Hard Disk Format SY-HD08

How to Replace a DVR Hard Drive:

  • Disconnect your DVR by unplugging any cables connected to it, including the power cable. Remove the screws located on the back of the unit that hold the top cover in place. There are usually two to six of these screws, depending on the model of DVR. Lay these screws in a safe place where they won't get lost, and slide the cover off
  • Locate the hard drive. This is a rectangular metal unit that measures 3 1/2 inches wide. It is usually located away from the other hardware, often in its own bracket. There will be two to four screws holding it in place. Remove these, disconnect the cables connected to the drive, and slide it out of the system
  • Check the label of the drive to see if it is IDE or SATA. It will say which one of the two interfaces it uses. Any replacement desktop hard drive of the same interface type will work in your DVR. Avoid using a laptop drive, because they won't fit and aren't designed for the high-stress environment of video streaming
  • Place the new drive into the brackets, and replace the screws that were removed from the old one. Plug the data and power cables into this drive. They will insert the same way they came out of the old one. Once the drive has been installed, put the cover back on the DVR unit, and replace the screws. Hook the DVR back up to the television, and it will be ready to record

How to Copy From a DVR to an External Hard Drive:

  • Install video software on your computer. To properly process your data transfer, you need video software, which you can get from computer and electronics retailers or online. Simple, easy-to-use programs can be downloaded for free. Use reputable sites, such as CNET.com, to find some of the more reputable free programs. More advanced programs, with sophisticated editing capabilities, will usually only be available for purchase
  • Connect your computer and DVR. In order to copy programs to your external hard drive, you need to transfer them to your computer. For older systems, and especially for desktop computers, you will need to use use RCA connectors to connect the DVR to the computer. RCA connectors are color-coordinated audio-visual cables used to connect electronics components, such as stereos and receivers, and they can be used with some computers and DVRs as well. Plug the yellow ends of the cable into the video jacks on the machines, then plug the red and white ends into the audio jacks. If you have a newer system, use USB cables to connect the computer and DVR. With a TiVo DVR and a wireless home network, you can connect your components wirelessly if you download proprietary TiVo software
  • Transfer the program to your computer. Choose the program you wish to transfer from your DVR then press "Play" while pressing "Record" on your computer software program. The program should transfer in real-time. Monitor the recording and, when finished, check for quality
  • Copy the program to your external hard drive. Using the video software on your computer, select your external drive as the destination for your next copy. Select the copy you just made from the DVR and make another copy on your external hard drive. Again, monitor the transfer and check for quality when you are finished

Package Included:

  • 1 x Standalone DVR
  • 1 x Remote Control