Home >> Car & Motorcycle Accessories >> Car Parts >> Car Rear View Camera for SUBARU FORESTER HL-5866

Car Rear View Camera for SUBARU FORESTER HL-5866

SKU:A1734000AZ

It is very necessary for us to install a camera at the back of the car, especially for those green hand, because we can not know well of the distance, the little kids or objects behind the car. And this Car Rear View Camera is specially designed for ...
Retail Price:
USD$ 88.78
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 41.29USD$ 33.55USD$ 25.82USD$ 15.51
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • IP Rating: IP66
  • TV Lines: 420 TV Lines
  • Sensor: 1/4in color CMOS
  • System: NTSC
  • Numbers of Pixels: 580 x 492
  • Lens Angle: 170°
  • Operating Temperature: -25℃~+75 ℃
  • Operating Voltage: 12V DC
  • Minimum Illumination: 0.2 LUX
  • Mounting lamp instead of lighting facilities
  • With distance label
  • Good choice for you
  • This is a non-OEM product

Detail:

Car Rear View Camera for SUBARU FORESTER HL-5866


  • The rear-view camera usually does permit the camera to view a continuous horizontal view from one corner, behind the car

How to Install a Rear-View Camera in Your Car:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

Package Included:


  • 1 x 1/4in Color CMOS OV7950 170° Wide Angle Car Rear View Camera for SUBARU FORESTER Series Sedan
  • 1 x User Manual
  • 1 x Positive-Negative Power Connection Cable