Home >> Car & Motorcycle Accessories >> Car Parts >> Car Rearview Camera for TOYOTA Prado HL-5865

Car Rearview Camera for TOYOTA Prado HL-5865

SKU:A1734000AX

Do you want to do this! What's This? Add video to your vehicle with this Car Rearview Camera.   It is very necessary for us to install a Car Rearview Camera at the back of the car, especially for those green hand, because we can n...
Retail Price:
USD$ 90.78
Wholesale Price:
 
Wholesale Price
Quantity 2-56-1415-39≥40
Price USD$ 42.69USD$ 34.77USD$ 26.86USD$ 16.31
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


  • IP Rating: IP66
  • TV Lines: 420 TV Lines
  • Sensor: 1/4in Color CMOS
  • System: NTSC/PAL
  • Numbers of Pixels: 580 x 492 / 628 x 582
  • Minimum Illumination: 0.2 LUX
  • Lens Angle: 170°
  • Operating Temperature: -25 ~ +75°C
  • Operating Voltage: 12V DC
  • Mounting lamp instead of lighting facilities
  • With distance label
  • This is a non-OEM product
  • This Car Rearview Camera can be used both in car and home
  • This Car Rearview Camera is suitable for guard and security

Details:

Car Rearview Camera for TOYOTA Prado HL-5865


  • The Car Rearview Camera usually does permit the camera to view a continuous horizontal view from one corner, behind the car

How to Install a Rear View Car Camera in Your Car:


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you

How Does a Rear-View Camera Work in a Car?

Car Rearview Camera for TOYOTA Prado HL-5865


  • Rear-View Camera Versus Rear-View Mirror
    Rear-View Camera Display Monitor on sun visorRear-view mirrors allow drivers to view a large portion of the area behind their vehicles. However, trunks and rear decks often limit the view of the road as much as ten to 15 feet behind the vehicle. Rear-view cameras, also known as "reversing cameras" or "backup cameras," resolve this problem. These cameras enable drivers to see objects and people directly behind their vehicles.
  • How Does a Rear-View Camera Work?
     Rear-View Camera Display Monitor on dash boardThe structure of a rear-view camera is different from other cameras. The reflection of a rear-view camera is horizontally flipped so that it produces a mirrored image. This is essential because the driver and the rear-view camera are in opposite positions. The mirrored image is also necessary because it causes the direction of the display to be constant with the mirrors mounted on the motor vehicle. The rear-view camera display is usually wired to automatically sense when the transmission is set in reverse, and it shows the rear view while the car is in reverse. The other items in the rear of the vehicle are also shown at all times. The rear-view camera usually consists of a wide-angle or fish-eye lens. Although the lens doesn't allow the camera to view distant objects, it does permit the camera to view a continuous horizontal view from one corner, behind the car, to another. Rear-view cameras are also generally mounted at a downward angle. This allows the camera to show potential barriers on the ground in addition to the location and position of walls and docks that may be looming around the corner.
  • How is a Rear-View Camera System Installed in a Car?
    Plate-mounted rear-view cameraRear-view camera systems are generally mounted to the lower outside areas of the vehicle or to the vehicle's bumper. With the camera mounted in these locations, it allows greater visibility. The rear-view camera display is often mounted inside the vehicle on either the sun visor or within the dash board area. Rear-view camera systems can be purchased as either wireless or wired back-up systems. In wired systems, the camera is linked to the display monitor via a long cable wire. In wireless systems, images are transformed to radio signals, transmitted and then converted from a radio signal back to a video image once it reaches the receiver and monitor.
    Wired systems such as portable rear-view camera systems or semi-permanent, all-in-one back up camera systems, for example, are generally sold to consumers who have smaller vehicles. These portable units include small display screens. The screen is easily attached to the sun visor and has a lengthy wire that connects to the camera.
    Because signals have to be converted via the airways with wireless systems, they sometimes receive interference from other wireless components as well as poor signal reception. As a result, many believe that much better quality is received with wired systems.

How to Install a Rear-View Camera in Your Car?

Car Rearview Camera for TOYOTA Prado HL-5865


  • Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts.
  • Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal.
  • Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out.
  • Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight.
  • Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse.
  • Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions.
  • Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you.

Package Included:


  • 1 x Car Rear View Camera
  • 1 x User Manual
  • 1 x Positive - Negative Power Connection Cable