Home >> Security & Surveillance >> Home Alarm >> Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001

SKU:A1485000RF

Do you want to keep your home safer? This Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control will be the best solution for you!The 4CH relay module can be applied to Home and Store alar...
Retail Price:
USD$ 27.38
Wholesale Price:
 
Wholesale Price
Quantity 2-78-1920-49≥50
Price USD$ 14.68USD$ 12.42USD$ 10.15USD$ 7.13
 
Qty:
pieces
If you want to buy only 1 piece, please alter the quantity in ‘My Cart’.
Note: you could enjoy the wholesale price of this item as long as the item quantity of your order is more than 1.
  • For online wholesaler or distributor, you can buy directly online. If you want to buy more than offered quantities for better price, please click wholesale inquiry.

  • Top Selling
 
  • Overview

Specifications:


Application Field:


  • Home and Store alarm System; Electric motor car, automobile, motorcycle alarm device, each kind of windows and doors controller and other industrial control

Brief Introduction:


  • This Wireless Relay Module could be complemented with 12V 4 channel multi-function remote control switch, 220V 4 channel remote control switch and 86 remote control switches
  • 4 channel wireless intelligence receiver controller with 4 relays may enable the equipment to control electric motors and switches, also could meet any other special request
  • This Wireless Relay Module characterized as stable performance, small size and high receiver sensitivity
  • Mainly used in the field of industrial control and security surveillance
  • It could be complemented with remote controls to form a complete wireless intelligence control system
  • The controller could be compatible with chips such as 2262/2260/1527/2240

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001


  • The multifunctional relay module is mainly used in the field of industrial control and security surveillance

Output:


  • Self-locking: Connect JP1 with shorting plug
  • Non-locking: Disconnect JP1 and JP2 with shorting plug
  • Interlocking: Connect JP2 with shorting plug
  • 2 Channel Interlocking 2 Channel Inching: Connect both JP1 and JP2 with shorting plug

Learning and Clear Procedures:


  • Learning Procedures: 1, Press the learning key, the LED lights. 2, Press any key on the remote, the LED flashes twice then turns off, indicating learning successfully
  • Clear Procedures: Press learning key for 8 seconds, the LED from on to off, indicating clear successfully

Multifunctional Automatic to Code Relay Module:


  • Working Voltage: DC12V
  • Static Current: ≤ 6mA
  • Working Temperature: -40 ℃ ~ +80 ℃
  • Receiver Sensitivity: ≥-105dBm
  • Working Frequency: 315/433MHz (optional)
  • Output Voltage: AC and DC optional
  • Output Current: ≤ 3A
  • Size: 72 x 52 x 26mm / 2.8 x 2.0 x 1.0in (L x W x H)

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001


  • This 4CH relay module characterized as stable performance, small size and high receiver sensitivity

Remote Controls:


  • Looks pretty decent
  • Internal circuit design science
  • Using SMT chip components
  • SAW resonator frequency stabilization
  • High stability, low power consumption
  • Working Voltage: DC12V
  • Working Current: ≤12mA
  • Operating Frequency: 315MHz, 433.92MHz frequency, etc. optional
  • Transmit Power: ≥ 10mW
  • Emission Distance: 100 meters (open)
  • Frequency Deviation: ± 0.2MHz
  • Transmission Speed: 50 ~ 60KHZ
  • Size: 55 x 30 x 13mm / 2.2 x 1.2 x 0.5in (L x W x H)

Detail:


Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001


  • With the 4 keys remote control, it is convenient to operate the wireless relay module

How to Reset a Remote Control:


Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do


  • Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
  • Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
  • Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

How to Build a Wireless Remote Control:

Zrabra Wireless 4 Channels Multifunctional Automatic to Code Relay Module with 1 Four Button Universal Remote Control AK-B1-DC12+C4 R001


Simple wireless devices use various components to activate an infra-red signal that broadcasts to a receiver box, allowing the user to program the control. Basic wireless remote controls simply turn a device on or off. Components used in a wireless device can be found at most electronics outlets and hobby shops. Specialized retail establishments have pre-packaged kits that can be used by a beginner. At the very least, even experienced electronics enthusiasts use pre-made remote control boxes due to the simplicity of their design, including ergonomic support. The structure of the wireless remote control provides a builder with not only knowledge but the reasons a receiver can be controlled by the device


  • Open the remote control housing and place a push button switch on the side. In the upper right corner of the housing, fasten a 3-volt battery holder. Be sure enough room is available to install and remove the battery
  • Run a wire from the push button switch and link to the 3-volt battery holder at the negative connection. Attach another wire to the push button switch and lead it to the Meg 1/4W resistor and the NPN silicon transistor. Run a third wire from the Meg 1/4W resistor and attach it to the 22K 1/4W resistor and and the PNP silicon transistor
  • Position the infra-red LED on the front of the housing. Attach the LED and run wires to both transistors. From the 22K 1/4W resistor, run a wire to the C220.01uF 16v ceramic disk capacitor. Run another wire between the NPN silicon transistor and the ceramic disk capacitor
  • From the positive connector on the 3-volt battery holder, connect a wire to the PNP silicon transistor. This will allow for proper current flow in a closed circuit. Ensure the push button switch is positioned to "off" and place a 3-volt battery into the holder. Close the remote control housing
  • Point the remote control at a receiver, making sure the LED on the control is aimed at the LED of the receiver. Push the button and the receiver should power on and off. To adjust the receiver to be programmed, point the remote control and hold down the push button switch. Adjust the pot or taper on the receiver

Package Included:


  • 1 x Wireless 4 Channels Multifunctional Automatic to Code Relay Module
  • 1 x Four Buttons Universal Remote Controls