- There are two built-in modes, which are compatible with icade mode and user-defined key-press mode (needs jailbreak). Easy for you to play and enjoy various kinds of games.
- Controller mode can be identified automatically without any further complicated settings. Simple and easy to use.
- Resolution power adjusts automatically. Compatible and well applicable on iPhone, iPhone3, iPhone4, iPhone4s, iPad, iPad2, iPad3 and all series of IOS devices.
- The Automatic direction identification of the setting interface helps it rotate with the game. Fully applicable on horizontal screen and vertical screen games.
- Support five keys pressed at the same time effectively. More suitable for acting in fighting games.
- Built-in rechargeable lithium battery makes it a long using life.
- Double joysticks design.
- User-defined key-press mode. Drag and drop icons to set. Flexible and easy to use.
- Original creation of R joystick turning visual angle mode. More suitable for first-person shooter games, easier to use than the touch screen.
How to use:
If it is your first time using avitoy controller, please press and hold button "setup" on your controller when you turn on your avitoy controller. For every controller will be tested before put into market, maybe when you use your avitoy controller, the Bluetooth pairing has not been removed yet. And only when the link indicator keeps flashing, your avitoy controller can be found by your IOS devices.
- Lightly press "Power" button to turn on the controller (When the controller is on, the Bluetooth indicator will stay on, while the link indicator will keep flashing).
- Click "Settings" icon on the interface of the tablet to enter the setting interface.
- Choose "General", and then Bluetooth.
- Turn on Bluetooth. (then below will show the device: avitoy controller P3.
- Click "avitoy controller P3"
- There will be a hint box，click the corresponding pin code on the controller buttons according to the hint, then press button "Start" on the controller.
When the controller is connected to the tablet, the Link indicator will stay on, and "connected" will also be shown on the tablet screen just behind "avitoy controller P3". Then when you press the buttons on the controller, the Action indicator will flash.
- "Cydia" icon will appear on the jailbreak Pad, click the icon to enter.
- Select "Sources", click "Edit" button on the top right side, then click "Add" button on the top left corner.
- Enter "www.avitoy.com" in the dialog box poped-up, click "Add Source", and the source will be downloaded automatically.
- After the download is completed, click "Return to Cydia" button, and "www.avitoy.com" sources will appear on the interface, then click "Done 'button on the top right corner. And click "www.avitoy.com" sources to enter
- Choose "avitoy controller driver", then click "Install" button on the top right corner to confirm the driver installation, and the driver will be installed automatically. After the installation is completed, click "Restart SpringBoard" button, and then turn off and restart the Pad.
- After restarting the Pad, click "Settings" icon on the desktop to enter. If "BTstack" button appears on the lower left column, it means software installation is completed. (Note: Wifi could not be connected after the software installed successfully. It is a small BUG of BTstack. Click "Settings" icon on the Pad, click "BTstack" button in the lower-left column, then select "None" in the right column. After you select successfully, "√" will appear behind "None". And the recommended default selection is "None".
- We have tested that it will not affect Wifi with Blutooth on in new BTstack..)
- After the installation is completed, "avitoy" controller icon will appear on the desktop, click to enter.
- Select "Bluetooth Device", turn on Bluetooth device and avitoy controller (Lightly press "power" button to turn on your controller. And when the controller is turned on, the Bluetooth indicator keeps flashing).
- Click "your avitoy controller" searched by the Bluetooth, wait until "Bluetooth GamePad connection successful" appears on the screen, then click "OK". And the controller connection is completed. (After the connection is completed, the Bluetooth and connection indicators of the controller will stay on.)
- Now you can enjoy the gaming fun.
In the game, you can set up the game control buttons by User-defined key press mode. Click "SETUP" button on the controller, and the corresponding button icons will appear on the Pad. You can easily drag the button icons on the interface, and set up the corresponding action buttons in accordance with your customary. Joypads L, R and direction keys can be zoomed out or zoomed in simply. You just need to put a finger on the inside circle, the other finger outside the circle to drag back and forth to zoom in or out. To restore the icons in orders, simply click "Back" icon on the top.
- Functions of 7 to 9 can only be activated with jailbreak IOS system.
- Some functions can only be activated with jailbreak IOS system.
- Broadband software setup is recommended, because fees will possibly be charged for internet setup for the software.
- Rechargeable batteries have a limited number of charge cycles and may need to be replaced by an authorized service provider. Also the battery life and charging cycles vary from both using and setting.