- Wireless control, easy to install
- Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows/ Blinds/ Cars or Other Appliances with voltage AC110~240V or DC0~28V.
- You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One/ several transmitters can control one/ several receivers simultaneously.
- If you use two or more receivers in the same place, you can set them with different codes.
- Transmitting Frequency: 315MHz / 433MHz
- Model No.: S1PT-DC12
- Channel: 1 CH
- Control Mode: Toggle (Press -> On; Press again -> Off)
- Coding Type: Fixed code
- Coding Setting: By soldering
- Power Supply (Operating Voltage): DC12V±1V (S1T-DC12)
- Working Voltage Range of Relay: AC110~240V or DC0~28V
- PCB size: 70mm x 53mm x 22mm
- Case size: 89mm x 64mm x 35mm
- Maximum Working Current: 10A / each channel
- Model No.: C-1
- Channel: 1 CH
- Remote Control Distance: 100m / 300ft (theoretically)
- Encode: Fixed code by soldering
- Unit size: 58mm x 39mm x 16mm
- Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
This RF radio wireless remote control switch consists of a high-power receiver and two remotes of the 100 meters control range.
Allowing you to control lamps / lights, TVs, motors, fans, cameras, video signals, audio signals, electrically operated doors/ locks/ windows/ blinds/ cars or other appliances with voltage AC110~240V or DC0~28V.
Install the wireless alarm, not only can guard against theft, prevent to rob, still can fire prevention, emergency and so on. If you are successful, install wireless alarm is for parents a strong concern and security, home to a wife and child peace.
- 1 x Receiver: S1PT-DC12 ( 1 channel / Toggle control mode)
- 2 x Transmitter: C-1
- 1 x User manual
- Initial state: Terminals 1 and 2: Normally open.
- Press the button : Turn on relay (connect 1 and 2)
- Release the button: Turn off relay (disconnect 1 and 2)